Xerox 128 Service Manual

paper seal by pulling it toward you with the other hand. 
Discard the seal along with the drop cloth.

5. Close the processor access door.

NOTE: If any dry ink should get on your skin, wash with mild 
soap and cold water.

The highlight color container holds the color dry ink. When 
directed by a screen message, replace the highlight color 
container. If the highlight color container is not replaced, the 
printer stops, and it will not operate until the highlight color 
container is replaced.

CAUTION:  Do not use warm or hot water, or general cleaning 
solvents to remove dry ink from your skin or clothing. The heat or 
solvent will set the dry ink and make it difficult to remove. If any 
dry ink should get on your skin, wash with mild soap and cold 
water.
If any dry ink should get on your clothes, brushing with a dry paper 
towel or a stiff-bristled brush may remove the ink. If not, launder 
your clothes with detergent and cold water. Tell a commercial dry 
cleaner that the spot is dry ink or "toner" so that they will not use a 
solvent that will set the dry ink stain.

1. Open the front processor access door and locate the highlight 

color container at the right side of the processor.

2. Place a drop cloth on the floor under the highlight color 

container area.