Xerox 220e Reference Guide
Printing From a PC
3
Printing Reference
3-3
Deleting files
You can delete individual Þles if you donÕt have access to an older version of
the Tektronix Windows driver with the installer program. You can perform
this procedure either from Windows or from DOS.
the Tektronix Windows driver with the installer program. You can perform
this procedure either from Windows or from DOS.
Note
There are two separate TEK.INI Þles described in the
following procedure.
following procedure.
1.
Delete the TEK.INI Þle in your main Windows directory by typing
this command; for example:
this command; for example:
DEL C:\WINDOWS\TEK.INI
2.
Go to your Windows\System subdirectory, for example:
CD \WINDOWS\SYSTEM
a.
Delete the TEK.DLL Þle; for example:
DEL TEK.DLL
b.
Open the TEK.INI Þle and look for the path for the
subdirectory where other Tektronix driver Þles are located.
(\TEKCOLOR is the default subdirectory name used by the
driver installer program, but you may have used a
different name.)
subdirectory where other Tektronix driver Þles are located.
(\TEKCOLOR is the default subdirectory name used by the
driver installer program, but you may have used a
different name.)
[FilePath]
Path=C:\TEKCOLOR
Path=C:\TEKCOLOR
c.
Go to the TEKCOLOR subdirectory and delete the
following Þles:
following Þles:
TEKPS.EXE
TEKPREV.DLL
README.TXT
*.PSD
*.TRI
TEKPREV.DLL
README.TXT
*.PSD
*.TRI
d.
If the TEKCOLOR subdirectory is now empty, you can
remove it.
remove it.