Xerox 380 Supplementary Manual

 

Locate the transit restraint on the right side of the printer.

 

Insert a wide coin into the transit restraint slot.   

 

While pressing inward with strong pressure, turn the transit restraint slot 

 

 

to lock the print head in place.  If you have trouble turning the lock, consider the 

following suggestions:

 

■

 

You may need to press inward on the lock with more force before you 

can turn the lock 

 

.

 

■

 

The printer may have not had time to place the printhead in the 

proper position for locking due to one of the following conditions:

 

■

 

AC power to the printer is disrupted.  For example, the power line cord     

is unplugged from its outlet.

 

■

 

The power switch is turned off while ink is being loaded into the 

printhead.

 

■

 

The printer encounters a fault condition which results in the immediate 

suspension of all printer operations.  Typically the front panel displays 

a "Service Required" message.

If the printhead is in the wrong position for locking, you will need to turn 

the printer on again and allow sufÞcient time for the printer to initialize.  

When the printerÕs front panel displays Ready, wait an additional 

10 minutes and then turn the printer off using the

 

 switch.  Once 

powered down, retry the transit restraint locking procedure.

32659-01

!