Xerox 380 补充手册
3
Repacking the Color Printer and its Accessories
Locking the transit restraint
Caution
To avoid damaging the printer, always lock the transit restraint before moving or
shipping the printer.
1.
Locate the transit restraint on the right side of the printer.
2.
Insert a wide coin into the transit restraint slot.
3.
While pressing inward with strong pressure, turn the transit restraint slot
clockwise
to lock the print head in place. If you have trouble turning the lock, consider the
following suggestions:
■
You may need to press inward on the lock with more force before you
can turn the lock
clockwise
.
■
The printer may have not had time to place the printhead in the
proper position for locking due to one of the following conditions:
■
AC power to the printer is disrupted. For example, the power line cord
is unplugged from its outlet.
■
The power switch is turned off while ink is being loaded into the
printhead.
■
The printer encounters a fault condition which results in the immediate
suspension of all printer operations. Typically the front panel displays
a "Service Required" message.
If the printhead is in the wrong position for locking, you will need to turn
the printer on again and allow sufÞcient time for the printer to initialize.
When the printerÕs front panel displays Ready, wait an additional
10 minutes and then turn the printer off using the
On/Off
switch. Once
powered down, retry the transit restraint locking procedure.
32659-01
2
1
3
!