Xerox 300x User Guide
Calibrating the Printer
3
User Manual
3-23
Sending calibration settings to the printer
Note
The Send Calibration command is available only in the Expert
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Calibration user mode. Refer to page 2-9 for instructions on
selecting this user mode.
Use the Send Calibration dialog box to send calibration settings to the
printer to change the printer’s default behavior.
printer to change the printer’s default behavior.
1.
Use the calibration setting currently in your computer’s memory,
or load a calibration setting to send to the printer.
or load a calibration setting to send to the printer.
a.
Select Load Calibration from the File menu.
b.
Select a calibration setting to load, and click OK.
1.
Select Send Calibration from the File menu.
2.
In the Send Calibration dialog box, click OK to send the currently
loaded calibration settings to the printer. The setting remains in
the printer until it is replaced with another setting.
loaded calibration settings to the printer. The setting remains in
the printer until it is replaced with another setting.