Xerox 6125 User Guide
Control Panel Menus
Phaser® 6125 Color Laser Printer
5-3
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1.
To display the menu screen, press the Menu button at the print screen.
2.
Press the Up Arrow or Down Arrow button until
Admin Menu
is displayed, and then
press the Forward Arrow or OK button.
3.
Press the Up Arrow or Down Arrow button until
System Setup
is displayed, and then
press the Forward Arrow or OK button.
4.
Press the Up Arrow or Down Arrow button until
PowerSaver Time
is displayed, and
then press the Forward Arrow or OK button.
5.
Press the Up Arrow or Down Arrow button to change the number of minutes that the
printer will wait before entering Power Saver mode.
printer will wait before entering Power Saver mode.
6.
Press the OK button to confirm your settings. The settings that have been confirmed are
displayed with the affix “*”.
displayed with the affix “*”.
7.
Press the Menu button to quit the menu operation and return to the print screen.
8.
Ready to print.
Note:
If you want to change values after you have confirmed them by pressing the OK button,
you need to set them from the start again.
Initializing Configured Values
Display the item you want to initialize, and then press both the Up Arrow and Down Arrow
buttons at the same time.
buttons at the same time.
Once the change process is completed, the factory defaults will be displayed. Press the
OK button to confirm the value.
OK button to confirm the value.