Xerox 750P Installation Instruction

Disabling and enabling protocols:  Phaser 750 front 
panel

When the front panel displays 

 press the Menu button.

Press the right-arrow (---->) button until Configuration is displayed.  Press the Menu 
button.

Press the right-arrow (---->) button until Network Settings is displayed.  Press the 
Menu button.

Press the right-arrow (---->) button until the desired protocol is displayed (for 
DHCP/BOOTP, display TCP/IP at this point).  Press the Menu button.     

Press the right-arrow (---->) button until On or Off is displayed.  

Press the Menu button.       

Press the right-arrow (---->) button until Interface is displayed.  NOTE: For 
DHCP/BOOTP, display DHCP/BOOTP rather than Interface.   Press the Menu 
button. 

Press the right-arrow (---->) button until On or Off  is displayed, depending on 
whether you want to enable or disable the protocol.  Press the OK button.

To return the printer to normal operation, press the Exit button (the left-most button) 
until the front panel displays Ready.

Disabling protocols:  PhaserShare Administrator

In the PhaserShare Administrator Main window, select the desired printer from the 
Printer List.

Click Configure Printer.  

In the Configure Printer dialog box, click the Ethernet (or Token Ring) tab.

In the Ethernet (or Token Ring) tab, click Protocol Settings. 

In the Protocol Settings dialog box, click the tab for the protocol you want to disable.  

On the tab for the selected protocol, find the field for enabling or disabling the 
protocol.  Select No.

Click OK.