Xerox 750P User Guide
Advanced Features and Troubleshooting Manual
85
Troubleshooting Phaser 750 Printers
Enabling and disabling SysStart Job execution
You may load a startup (Sys/Start) file onto an optional internal IDE hard disk. The
Sys/Start job file is similar to an init file: When you turn on the printer, the file
executes — providing that Sys/Start has been enabled through a control file downloaded
to the printer.
Sys/Start job file is similar to an init file: When you turn on the printer, the file
executes — providing that Sys/Start has been enabled through a control file downloaded
to the printer.
You can also control SysStart Job execution from the printer’s front panel Printer Defaults
menu, using the Startup Mode option.
menu, using the Startup Mode option.
1.
Press Menu; and scroll to Configuration.
2.
Press Menu; and scroll to Startup Mode. Scroll to On and press OK; the printer
displays the following:
displays the following:
3.
Press
until
Ready appears.
Macintosh users
1.
From the printer’s CD-ROM, run the Installer application. Select Custom Install.
Select Printer Utilities. From your computer’s hard disk, open the PhaserTools folder.
Select Printer Utilities. From your computer’s hard disk, open the PhaserTools folder.
2.
From the PhaserTools folder, double-click Apple Printer Utility.
■
Under AppleTalk Zones, select your printer’s zone.
■
Under Printers, select your printer.
■
Click Open Printer.
3.
From the Utilities menu, select Send PostScript File.
4.
From the PhaserTools folder, open the Printer Utilities folder; select SysStartJob; click
Add.
Add.
5.
Click Send.
Configuration
<---- ----> Menu
<---- ----> Menu
Startup Mode
<---- ----> : On
<---- ----> : On
OK