Xerox 7760dn User Guide

Configuring the Network Address

Phaser® 7760 Color Laser Printer

2-6

Dynamic Methods of Setting the Printer’s IP Address

Set the printer’s IP address using any of the following methods. DHCP is enabled by default on
all Phaser printers.

■

DHCP

■

CentreWare IS

■

AutoIP

Enabling DHCP on the Printer

Verify that the printer DHCP protocol is enabled by setting the control panel or by using
CentreWare IS. DHCP is enabled by default on all Phaser printers.

Note:

To determine the printer’s IP address, select

Printer Identification

on the control panel.

See also:

Control Panel Features

on page 1-9

Changing or Modifying the IP Address Using CentreWare IS

CentreWare IS provides a simple interface that enables you to manage, configure, and monitor
networked printers from your desktop using an embedded web server. For complete
information about CentreWare IS, click the Help button in CentreWare IS to go to the
CentreWare IS Online Help.

After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the Protocols folder on the left sidebar.

Select TCP/IP.

Enter or modify the settings, and then click Save Changes at the bottom of the page.

Information Required for Manual IP Addressing

Information

Comments

Internet Protocol (IP) address of the printer

Format is xxx.xxx.xxx.xxx, where xxx represents
a decimal number from 0–255.

Network Mask

If you are unsure, leave this blank; the printer
chooses an appropriate mask.

Default Router/Gateway address

Router address is required to communicate with
the host device from anywhere other than the
local network segment.