Xerox 7760dn User Guide

To select a stapling option for a specific print job:

If your printer has a finisher, you can have the printer punch holes in the paper after it is 
printed. Your finisher will have either the 3-hole or the 2-/4-hole punch options. 

Hole punching is not available when printing booklets.

Use the following guidelines when selecting hole punching options:

■

The edge of the paper to be punched must be 257 mm (10.12 in.), 267 mm (10.5 in.), 
270 mm (10.63 in.), 279 (11 in.), or 297 mm (11.7 in.).

■

Thick Card Stock, Extra Thick Card Stock, Thick Glossy Paper, transparencies, labels, 
and envelopes are not punched.

■

If you select Quadruple for stapling and 4 Holes for hole punching, the paper is not 
punched.

■

None (default): Holes are not punched.

■

2 Holes: Punches 2 holes 80 mm (3.15 in.) apart. 

■

3 Holes: Punches 3 holes 108 mm (4.25 in.) apart. 

■

4 Holes: Punches 4 holes 80 mm (3.15 in.) apart.

The sample image displayed in the driver shows the location of the holes, which depend on the 
orientation of the page and the paper feed direction (long-edge feed or short-edge feed).

Select the Output Options tab.

Select the stapling option from the Stapling drop-down list.

In the Print dialog box, select Finishing Options from the drop-down 
list.

Select the stapling option.