Xerox 6110MFP User Manual
13
.5
<Maintenance>
4
Grasp the toner cartridge and align it with the corresponding slot
inside the machine. Insert it back into its slot until it clicks into place.
inside the machine. Insert it back into its slot until it clicks into place.
5
Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
The machine uses four colours and has a different toner cartridge for
each one: yellow (Y), magenta (M), cyan (C), and black (K).
each one: yellow (Y), magenta (M), cyan (C), and black (K).
When the toner cartridge is completely empty:
• Toner Empty appears on the display.
• The machine stops printing. For the Phaser 6110MFP/XN, incoming
• Toner Empty appears on the display.
• The machine stops printing. For the Phaser 6110MFP/XN, incoming
faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 12.1.
information for toner cartridges, see page 12.1.
1
Turn the machine off, then wait a few minutes for the machine to
cool.
cool.
2
Open the front cover.
Note
• If toner gets on your clothing, wipe it off with a dry cloth
and wash clothing in cold water. Hot water sets toner into
fabric.
fabric.
3
Pull the corresponding toner cartridge out.
4
Take a new toner cartridge out of its package.
5
Holding the toner cartridge, thoroughly roll it 5 or 6 times to
distribute the toner evenly inside the cartridge.
distribute the toner evenly inside the cartridge.
6
Remove the cartridge cap.
Note
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.