Xerox 6180MFP User Guide

■

Do not attempt any maintenance procedure that is not specifically described in the 
documentation supplied with your printer.

■

Do not use aerosol cleaners. The use of supplies that are not approved may cause poor 
performance and could create a hazardous condition.

■

Do not attempt to open, reuse, or burn any consumables or routine maintenance items. For 
information on Xerox supplies recycling programs, go to 

.

 

Your printer and supplies were designed and tested to meet strict safety requirements. These 
include safety agency examination, approval, and compliance with established environmental 
standards.Your attention to the following safety guidelines helps to ensure the continued, safe 
operation of your printer.

 

Place the printer in a dust-free area within a temperature range of 50° F to 95° F (10° C to 
35° C) and a relative humidity range of 15 percent to 80 percent.

Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room 

can cause condensation inside the machine, directly interfering with image transfer.

Place the printer in an area where there is adequate space for ventilation, operation, and 
servicing. The recommended minimal spacing is:

■

35 cm (13.8 in.) above the printer

■

108 cm (42.5 in.)

■

10 cm (3.9 in.) behind the printer

■

60 cm (23.6 in.) in front of the printer

■

10 cm (3.9 in.) on the left side of the printer

■

10 cm (3.9 in.) on the right side of the printer