Xerox 6180MFP User Guide
Control Panel Error Messages
Phaser® 6180MFP Multifunction Printer
10-34
Messages About the Printer and Other Items
Message
Condition/Reason/Action
042-700
Over Heat
The printer’s internal temperature is too high.
The printer has been stopped. Wait 1 hour before restarting the
printer. Ensure the printer has adequate cooling space around it,
and that the cooling vents are not blocked.
printer. Ensure the printer has adequate cooling space around it,
and that the cooling vents are not blocked.
077-912
Push in Tray 2
Tray 2 is pulled out.
Push Tray 2 into the correct position.
Controller Error
Error 116-397
and
-398
Restart Printer
An internal controller error occurred.
Restart the printer.
Disabled Func
Press OK
The function that you are trying to access has been disabled.
Enable the function through the control panel menus, or contact
your printer administrator. See
your printer administrator. See
Door A Open
Close Door A
The front cover is open.
Close the front cover.
Fan Motor Error
Error 042-3NN
Restart Printer
An error has occurred with the fan.
Restart the printer. If the problem persists, contact Xerox
Technical Support.
Technical Support.
Fuser Error
Error 010-397
Error Code: xx
Restart Printer
A fuser error has occurred.
Restart the printer. If the problem persists, contact Xerox
Technical Support.
Technical Support.
Invalid Feature
Press OK
The user is not registered to print in color when using an
authentication function.
authentication function.
Contact your administrator.
Invalid Job
Press OK
When the configuration of the printer on the print driver does not
conform to the printer you are using, this message appears.
conform to the printer you are using, this message appears.
Press the Stop button to cancel the print job.
Make sure that the configuration of the printer on the print driver
conforms to the printer you are using.
conforms to the printer you are using.
Invalid User
Press OK
The user is not registered to print on the printer when using an
authentication function.
authentication function.
Contact the administrator.
Jam at Tray 1
Check Tray 1
Open Door A
Paper is jammed inside Tray 1 (MPT).
Remove the jammed paper. Open and close the front cover. See