Xerox 6180MFP User Guide

There are two protocols available for dynamically setting the printer’s IP address: 

■

DHCP (enabled by default on all Phaser printers)

■

AutoIP

You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off 
DHCP.

You can print a report that includes the printer’s IP address. On the control panel, press 

the System button, select 

, press the OK button, select 

, and 

then press the OK button. The IP address is listed on the Configuration report.

To turn on/off either the DHCP or AutoIP protocol:

On the control panel, press the System button.

Select the 

menu, and then press the OK button.

Select the 

menu, and then press the OK button.

Select the 

menu, and then press the OK button.

Select 

, and then press the OK button.

 

To turn on/off the DHCP protocol:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field.

Select Properties.

Select the Protocols folder on the left navigation panel.

Select TCP/IP.

In the Get IP Address field, select the DHCP/Autonet option.

Click the Save Changes button.