Xerox 8510 Supplementary Manual

To select the color correction in a supported driver:

If you need to make additional color adjustments to the color correction you have selected for 
your job, you can adjust the following sliders throughout the More Options selection in a 
supported driver:

■

Lightness: Move the slider to the right to lighten or to the left to darken the colors in your 
print job. (White remains white and black remains black.)

■

Contrast: Move the slider to the right to increase or to the left to decrease the contrast. 
With increased contrast, saturated colors become more saturated, darker colors become 
more black, and lighter colors become more white.

■

Saturation: Move the slider to the right to increase or to the left to decrease the color 
intensity without changing the darkness.

■

Cyan/Red: Move the slider to change the gamma function between cyan and red. Moving 
the slider to the right increases the cyan and decreases the red (its compliment) and vice 
versa.

■

Magenta/Green: Move the slider to change the gamma function between magenta and 
green. Moving the slider to the right increases the magenta and decreases the green (its 
compliment) and vice versa.

■

Yellow/Blue: Move the slider to change the gamma function between yellow and blue. 
Moving the slider to the right increases the yellow and decreases the blue (its compliment) 
and vice versa.

Select the Apply to CMYK check box in the driver to apply the color adjustments 

when Press Match color corrections are used.

The sample images change as you move the sliders. To track the adjustments, select the Print 
Settings on Page box to print the file name, print-quality mode, and color settings for the job 
on the edge of the page.

Select the TekColor tab.

Select the desired color correction. Some of the color corrections are 
grouped under Office Color or Press Match.

In the Print dialog box, select General.

Select TekColor from the drop-down list.

Select the desired color correction.

In the Print dialog box, select Image Quality from the drop-down list.

Select the desired color correction from the Color Correction 
drop-down list.