Xerox 8510 Supplementary Manual
Printing in Black and White
Phaser® 8510/8560MFP Multifunction Product
1-13
Printing in Black and White
If you want your output in black, white, and shades of gray, you can select Black & White in a
supported printer driver:
supported printer driver:
Selecting Black and White for PCL Drivers
The PCL driver does not contain the black and white color setting. If you are using a PCL
driver, you must select Black & White on the control panel:
driver, you must select Black & White on the control panel:
1.
Press the System button.
2.
Select
Job Defaults Setup
, and then press the OK button.
3.
Select
Print Defaults Setup
, and then press the OK button.
4.
Select
PCL Setup
, and then press the OK button.
5.
Select
Color Mode
, and then press the OK button.
6.
Select
Black & White
, and then press the OK button.
Note:
Changing the color mode to Black & White on the control panel affects all print jobs.
Ensure the color mode is set back to color when your print job is finished.
Operating System
Steps
Windows 98 SE,
Windows 2000,
Windows XP,
Windows 2000,
Windows XP,
Windows Server 2003
PostScript driver
PostScript driver
1.
Select the TekColor tab.
2.
Select Black & White.
Mac OS 9 driver
1.
In the Print dialog box, select Print Quality/Color 1.
2.
Select Black & White from the Color Correction drop-down list.
Mac OS X (version 10.2
and higher) driver
and higher) driver
1.
In the Print dialog box, select Image Quality from the drop-down
list.
list.
2.
Select Black and White from the Color Correction drop-down list.