Xerox 490cx User Guide
155
SEARCH
THE XEROX WORKCENTRE CONTROL PROGRAM
Xerox WorkCentre 490cx Control Program Window
When the Xerox WorkCentre 490cx Control Program on LPT1 window
opens, click the appropriate tab for the options you want to display. On the
appropriate tab, specify your changes.
opens, click the appropriate tab for the options you want to display. On the
appropriate tab, specify your changes.
Using the Status Tab
This tab shows the printer status, ink levels, and print job status.
The Status tab includes these buttons:
•
Cancel Print
•
Pause
•
Print Test Page
The information area displays which job is printing, which page and copy, the
time, and any alert messages.
time, and any alert messages.
Using the Options Tab
This tab allows you to specify the Control Program setup options, such as
Running Minimized and Closing Status at End of Job.
Running Minimized and Closing Status at End of Job.
Note:
If a Xerox printer or another printer is connected to the same port on your
computer through a switch box or other device, check Disable Xerox
WC490cx DOS Printing and restart Windows before switching from one
printer to the other. Switching printers without selecting this option may
cause printer errors.
If a Xerox printer or another printer is connected to the same port on your
computer through a switch box or other device, check Disable Xerox
WC490cx DOS Printing and restart Windows before switching from one
printer to the other. Switching printers without selecting this option may
cause printer errors.