Xerox 7228 User Guide

176 

5. Select 

 repeatedly until the System Settings screen (with an Exit button) is displayed. 

6. Select 

. 

7.  If you changed any settings, the Device will automatically reboot to register and enable your new 

settings.  After the machine is restarted, print out a settings list to confirm that the ports are enabled 
and TCP/IP is correctly configured. 

For information on how to print a settings list, refer to the Settings List topic in the Network 
Connectivity section of this guide. 

Configuring the SNMP Port 

Configure the transport protocol for the SNMP port using CentreWare Internet Services. 

1.  Start a web browser on a network connected workstation. 

2.  Enter the machine’s IP address in the address box of the browser and press Enter. 

3. Click 

the 

 tab. 

4. Click 

. 

5.  Select (place a checkmark in) the UDP check box next to SNMP. 

6. Click 

. 

7.  Enter the System Administrator user ID and password when prompted and click OK. 

8. Click 

the 

 when it displays.  If a Reboot button fails to display, click the Status tab and 

click Reboot Machine from that screen.