Xerox 7228 User Guide

204 

Configuring Network authentication (by a remote Accounting server) 

Network authentication uses the user information managed on a remote Accounting server to manage 
authentication (access) to available machine services. 

To enable Network Authentication for use with this Device, at your networked workstation, perform the 
following steps: 

1.  Open your Web browser and enter the TCP/IP address of the machine in the Address or Location 

field. Press Enter. 

2. Click 

the 

 tab. 

3. Select 

 in the list of hot links. 

4. Select 

 from the Auditron Mode drop-down list. 

5.  Place a checkmark in the Enable box for each service that you wish to restrict access to.  For 

explanations of each service, click the Help button. 

6. From 

the 

 drop-down menu, select either On or Off (keep logon records).  The 

On selection will verify user information.  When Off (keep logon records) is selected, User ID and 
Account ID must be entered at the Device, but user information will not be checked.  A logon record 
will be kept by the Device, however. 

7. Click 

 and enter the Administrator User name and password when prompted. 

8. Click 

the 

 button, then OK, when prompted. 

9.  Refresh your web browser, then click on the User Details Setup link to set the Store User Details 

setting.  Note that you can set either NVM or hard disk as the destination for saved authentication 
information.  User Details Setup also allows you to configure the characteristics of the login prompt 
for User Authentication.