Xerox 7228 User Guide

23 

Port Status (SNMP Enablement) 

1.  On the SNMP selection menu, press the selection line labeled Port Status. 

2. Press 

the 

 button. 

3.  On the Port Status screen, note which of the two buttons is highlighted as the current setting for 

SNMP Enablement.  The available settings are Enabled or Disabled.  For SNMP to function, it must 
be set to Enabled. 

4.  To change settings, press your setting of choice, then press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button. 

To exit the SNMP selection menu, which returns you to the Port Settings menu, press the rectangular 
Close

 button in the upper right corner of the touch screen. 

 

6.  To exit the Port Settings menu, returning to the Device's Main screen, press the rectangular Close 

button in the upper right corner of the Port Settings menu screen. 

7.  Press the rectangular Close button in the upper right corner of the Network Settings screen. 

8.  Press the rectangular Close button in the upper right corner of the System Settings screen. 

9.  Finally, press the rectangular Exit button in the upper right corner of the System Settings screen.