Xerox 7228 User Guide

260 

Configure IPP 

 

N5.7

 

1.  Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  

Press Enter. 

2. Click 

the 

 tab. 

3.  Click the plus (+) symbol to the left of the Protocol Settings file folder. 

4. Select 

 in the directory tree. 

5.  The available selections include: 

Port Number, with a default value of 631.  This is the port number assigned by IANA (Internet 
Assigned Numbers Authority.  It does not need to be changed. 

Additional Port Number entry box.  You can enter port 80 (HTTP) here as a backup port. 

A TBCP Filter checkbox (displayed when PostScript is enabled). 

Administrator Mode checkbox.  This is disabled by default.  Consult the On-Line Help for use of this 
feature. 

DNS checkbox. 

Connection Time-out entry box. 

6.  Verify that the DNS checkbox is checked (enabled) by default.  If enabled, the DNS Server will be 

available to resolve Host Names to IP Addresses, in support of printing with IPP. 

7. Enter 

a 

 value for jobs being sent to the Device through this Port.  This is the 

length of time that the Controller will wait for an end of job command before printing the current job. 

8. Click 

the 

 button to accept changes, or the Undo button to return settings to their previous 

values.  Note:  Setting changes are not applied until you restart the Device.  There is a convenient 
Reboot Machine

 button on the Status Tab of Internet Services.