Xerox 7228 User Guide

29 

1.  Used for static IP Addressing (with "Manual" selected as your addressing method), on the Protocol 

Settings menu, press the selection line labeled TCP/IP - IP Address.  Note that the IP Address may 
be viewed, but not changed, with dynamic addressing enabled. 

2. Press 

the 

 button. 

3.  On the settings screen, use the rectangular Next key, together with the numeric keypad of the Control 

Panel, to enter in the appropriate IP Address. 

4.  To save settings, press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button. 

1.  Used for static IP Addressing (with "Manual" selected as your addressing method), on the Protocol 

Settings menu, press the selection line labeled TCP/IP - Subnet Mask.  Note that the Subnet Mask 
may be viewed, but not changed, with dynamic addressing enabled. 

2. Press 

the 

 button. 

3.  On the settings screen, use the rectangular Next key, together with the numeric keypad of the Control 

Panel, to enter in the appropriate Subnet Mask. 

4.  To save settings, press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button. 

1.  Used for static IP Addressing (with "Manual" selected as your addressing method), on the Protocol 

Settings menu, press the selection line labeled TCP/IP - Gateway Address.  Note that the Gateway 
address may be viewed, but not changed, with dynamic addressing enabled. 

2. Press 

the 

 button. 

3.  On the settings screen, use the rectangular Next key, together with the numeric keypad of the Control 

Panel, to enter in the appropriate Gateway. 

4.  To save settings, press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button.