Xerox 7228 User Guide

33 

Port Status (LPD Enablement) 

1.  On the LPD selections menu, press the selection line labeled Port Status. 

2. Press 

the 

 button. 

3.  On the LPD Port Status screen, note which of the two buttons is highlighted as the current setting for 

LPD Enablement.  The available settings are Enabled or Disabled.  For the LPD to function, it must 
be set to Enabled. 

4.  To change settings, press your setting of choice, then press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button. 

1.  On the LPD selections menu, press the selection line labeled LPD Port Number. 

2. Press 

the 

 button. 

3.  Note the setting of Port 515, which is the recommended, default value.  To change the setting, use 

the keypad displayed on screen. 

4.  To change settings, press your setting of choice, then press the Save button. 

5.  To exit the screen, without making any changes, press the Cancel button. 

To exit the LPD selections menu, which returns you to the Port Settings menu, press the rectangular 
Close

 button in the upper right corner of the touch screen. 

1.  To exit the Port Settings menu, returning to the Device's Main screen, press the rectangular Close 

button in the upper right corner of the Port Settings menu screen. 

2.  Press the rectangular Close button in the upper right corner of the Network Settings screen. 

3.  Press the rectangular Close button in the upper right corner of the System Settings screen. 

4.  Finally, press the rectangular Exit button in the upper right corner of the System Settings screen.