Xerox 7228 User Guide

41 

Before You Start 

1. Print 

a 

 as stated in the Network Connectivity section of this guide. 

2.  Referring to the Settings List, verify that SMB is enabled.  To enable SMB at the Device, if required, 

follow the procedure below. 

3.  Referring to the Settings List, verify that DNS (or WINS, if using only a Windows NT network) is 

.  The use of Naming Servers is REQUIRED to resolve NetBIOS device names to IP 

addresses for packet routing over the TCP/IP network. 

4.  To enable the Device to communicate with the Naming Servers, refer to the instructions supplied in 

the topic "TCP/IP Dynamic Addressing", located in the NOS Selection section of this guide. 

5.  When using WINS or DNS, be sure to refer to your Server Operating System documentation for the 

appropriate procedure to use to enable NetBIOS name to IP address resolution on the Server. 

1. Press 

the 

 on the Control Panel. 

2. Press 

the 

 on the numeric keypad five consecutive times.  (This is the factory default 

"password.") 

3.  Press the rectangular Confirm button on the touch screen. 

4. Press 

the 

 (the right-hand button of the two buttons displayed on the touch 

screen).  Note:  If you press the left button by mistake, the Main menu will be displayed and you will 
have to start over at step one above. 

5. Press 

the 

. 

6. Press 

the 

.