Xerox PE120 User Manual

Paper Handling

3.4

- To avoid smudging caused by fingerprints, handle them 

carefully.

- To avoid fading, do not expose printed transparencies to 

prolonged sunlight.

• For  labels:

- Verify that their adhesive material can tolerate a fusing 

temperature of 200 

o

C (392 

o 

F) for 0.1 second.

- Make sure that there is no exposed adhesive material 

between them. Exposed areas can cause labels to peel off 

during printing, which can cause paper jams. Exposed 

adhesive can also cause damage to machine components.

- Do not load a sheet of them through the machine more than 

once. The adhesive backing is designed for one pass 

through the machine.

- Do not use labels that are separating from the backing 

sheet or are wrinkled, bubbled or otherwise damaged.

• Do not use Carbonless paper and Tracing paper. Use of 

these types of paper could result in chemical smells and could 

damage your machine.

Load the print material you use for the majority of your print 

jobs in the standard tray.

The standard tray can hold a maximum of 250 sheets of 20 lb 

plain paper. 

You can purchase an optional paper tray (Tray 2) and attach it 

below the standard tray to load an additional 250 sheets of 

paper. See page D.6 for more information about installing the 

optional Tray 2.