Xerox M24 Supplementary Manual
Before You Start
Before You Start
FP1
Fax (Phone)
Before starting the setup:
●
You cannot use this machine with a call waiting service.
●
A facsimile located close to a main unit of a cordless phone can cause distorted images or interrupted transmission. This
machine should be installed at least five meters away from the main unit of the cordless phone.
machine should be installed at least five meters away from the main unit of the cordless phone.
●
If the digital line leased for your company network is multiplexed, facsimile communication may be restricted as follows:
■
The features using our unique transmission method, such as Recipient Print Sets, Relay Broadcast and Remote
Mailbox, are not available.
Mailbox, are not available.
■
The transmission speed is limited.
■
Super G3 cannot be used.
Communications modes:
●
G3 (Auto) - Normal Fax communications, the machine automatically switches modes in the following order of priority:
Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-TG3 depending on the capabilities of the remote
terminal.
Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-TG3 depending on the capabilities of the remote
terminal.
●
F4800 - Select this mode when transmitting over noisy or bad telephone lines, as can be the case with overseas calls.
Connecting the phone line:
1
LINE 1
Connect the fax to a public switched telephone network (PSTN).
An external telephone cannot be connected.
An external telephone cannot be connected.
2
TEL
An external telephone is connected here.
3
LINE 2 (Line 2)
Connect to a public line.
4
LINE 4 (Line 4)
Connect to a public line.
Click
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/fp1-beforestart.htm [9/4/03 8:33:06 AM]