Xerox M24 Supplementary Manual
Setting PDL Emulations
Setting PDL Emulations
N3.3
To set the PDL (Page Description Language) Emulations, used by the Printer's Input Ports, perform the
following steps:
following steps:
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press Enter.
Press Enter.
2.
Click the Properties button or Tab.
3.
Click the third File folder in the Properties Tab directory tree, labeled Emulation Settings.
4.
Click on the Print Mode hot link to access a List of the Printer's Input Ports, displaying the Page
Description Language emulations they are currently using.
Description Language emulations they are currently using.
5.
Depending upon the Ports enabled at the Printer, the list of displayed Ports includes: Parallel, AppleTalk
(with PostScript), SMB, NetWare, LPD, IPP and Port 9100. Typical Page Description selections for each
Port include: Autoselect, PostScript, HP-GL/2, PCL and TIFF.
(with PostScript), SMB, NetWare, LPD, IPP and Port 9100. Typical Page Description selections for each
Port include: Autoselect, PostScript, HP-GL/2, PCL and TIFF.
6.
Make your required setting changes, and click the rectangular Apply New Settings button to have the
printer register the changes. To return settings to their previous values, without making changes, click
the Restore Settings button.
printer register the changes. To return settings to their previous values, without making changes, click
the Restore Settings button.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N3_3_PDL.htm [9/4/03 8:33:15 AM]