Xerox M24 Supplementary Manual

Restricting Printer Access

Using Internet Services, access to the Printer's Services can be restricted by Host IP Address.

 To restrict printer access, perform the following steps: 

1.  

Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field. 
Press Enter.

2.  

Click the Properties button or Tab.

3.  

Click the plus symbol (+) to the left of the Protocol Settings file folder.

4.  

Select TCP/IP in the directory tree.

5.  

Scroll down the page to reveal the IP Address List subject label.

6.  

Enable (with a check mark) the IP Filter check box.

7.  

Click the available Edit button.

8.  

When the list of ten lines of IP Address and Subnet Mask entry boxes is displayed, supply the IP 
Addresses and Subnet Masks of up to ten hosts (individual workstations) that are authorized to access 
the Printer's services. Caution: All other hosts not specified in this list will be prevented from accessing 
the Printer's services.

9.  

Click the Apply New Settings button to accept the changes. To exit the settings screen without making 
changes, click the Restore Settings button. 

Note: Changes to settings are not applied until you restart the Printer. A remote Reboot button is available on 
the Status Tab of Internet Services.

file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N5_8_2_Access.htm [9/4/03 8:33:17 AM]