Xerox M24 Supplementary Manual

6a3 - NetBIOS over IP Peer to Peer Printing

installer disk for this workstation.

4.  

Click the Identification Tab and verify that this workstation has a UNIQUE Computer Name (15 
characters maximum) and is a member of a workgroup (Workgroup is the default Windows workgroup 
name).

5.  

Click the Configuration Tab and select (highlight) the TCP/IP Protocol. Click the Properties button 
and select the NetBIOS Tab. Verify that the checkbox labeled "I want to enable NetBIOS over TCP/IP" 
is checked. Next, click the DNS Configuration Tab and make sure that the "Enable DNS" radio button 
is selected. Enter in this workstation's Computer Name (from the Identification Tab) into the "Host" text 
box. Enter the Domain in which this Host (Computer Name) resides into the "Domain" text box 
(xerox.com, for example). In the boxes provided, enter the IP address of the DNS (Domain Name 
Service) Server. Finally, click the IP Address Tab and verify that this workstation is using either a 
dynamic or static method to obtain a valid TCP/IP Address.
Note: If you are operating a Windows Internet Naming Service Server on an NT only network, you may 
wish to configure WINS instead of DNS by selecting the WINS Configuration Tab. 

1.  

From the Start menu, select Settings and then Printers.

2.  

Double click the Add Printer button and click Next.

3.  

When the Add Printer Wizard displays, select Network Printer.

4.  

Select Browse to search for the printer's Workgroup over the Microsoft network.

5.  

Select the plus symbol (+) to the left of Entire Network to expand it if necessary.

6.  

Double click the name of the Workgroup for the printer as shown on the Settings List. Select the SMB 
Host Name as shown on the Settings List. Click OK, then click Next.

7.  

When the Manufacturers and Printers window displays, select Have Disk… and enter in the path to 
your driver files. Note that you can also use the Browse button to locate the required .INF file.

8.  

Click OK on the "Open" screen, if you used the Browse button.

9.  

Click OK on the "Install From Disk" screen.

10.  

When the "Printers" list is displayed on screen, select your Printer. Click Next.

11.  

When prompted, accept the default printer name, or give your printer a more descriptive name. Select 
either Yes or No to make this printer your default Windows printer. Choose Yes if you will be printing 
primarily to this printer from your Windows applications. Click Next.

12.  

Print a Test Page. Verify that it prints at the Printer.

13.  

Click Finish.

1.  

From the Start menu, select Settings and then Printers. 

2.  

Right click on the Printer's icon and select Properties.

3.  

Select the correct paper size and any other default settings you wish to set for the printer. 

file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a3.htm (2 of 4) [9/4/03 8:32:43 AM]