Xerox M24 Supplementary Manual

Step 3 - Install 

Step 3.     

Follow the procedure outlined below to print a Settings List. 

To print a copy of this procedure, go to the Network Connectivity tab of the guide and select 

Settings List. 

You can then use your browser's Print function to print the procedure.

 To print a Settings List, with the Printer switched ON, perform the following steps:

1.  

Press the Machine Configuration (Confirmation) button. This is the lowest of the three square 
buttons to the immediate left of the Control Panel’s numeric keypad.

2.  

Press the Billing Meter/Print Report Tab on the Control Panel’s touch screen. This is the second Tab 
from the left side of the screen.

3.  

Press the Print Report/List button. This is the lowest of the two buttons displayed vertically on the 
touch screen.

4.  

Press the Copy Mode Settings button. This is the center button in the upper row of three buttons 
displayed horizontally on the touch screen. 

5.  

Press the Square (Settings List) button displayed by itself on the screen.

6.  

Press the large, green, Start button, located to the immediate right of the Control Panel’s numeric 
keypad.

7.  

The printing process will be graphically displayed on the touch screen. Upon receipt of the Settings List, 
note that the three page print is formatted into two columns with horizontal ruled lines indicating four 
distinct data display areas on the print. The first area displays System Settings. The second area 
displays Copy Settings. The third area displays Print Settings. The fourth area displays 
Communication Settings.

 

file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_3.htm [9/4/03 8:32:27 AM]