Xerox x2 tech User Manual

 

 

11. Rotate the feed roller knob toward you. Continue

to forward the media until you hear a beep from 
the printer.  The printer will sense the new 
media’s leading edge. Ensure that there is even 
tension and no wrinkles on the media. 

12.   Close the printer’s top cover.  The printer will 

start initializing, and you should hear activity as 
it checks and positions the newly loaded media 
roll. 

After completing its self-test, the printer will 
forward some of the newly loaded media 
through the print path and then cut it.  This 
assures that the media has a clean-cut leading 
edge when printing. 

13. Examine the cut edge of the media to verify that

the cutter is properly set and is cutting the media
cleanly.  If it is not a clean cut, change the 
printer’s cutter setting to match the media type.  
Refer to the Operations chapter as described in 
Media type. 

14. Ensure the printer is online and ready to receive 

the next print job.  

15.  Set the media type and attributes at the 

operations panel.  Refer to the Operations Panel
Menu section. 

 

This completes installation of a new media roll in
the printer.