Gestetner c7006dw Operating Guide
Troubleshooting
80
4
E
Holding the green inset grips of
the new photoconductor unit,
push the unit back to its original
position.
the new photoconductor unit,
push the unit back to its original
position.
F
Close the front cover.
Confirm that the front cover closes
properly.
Confirm that the front cover closes
properly.
G
Turn on the printer’s power
switch.
switch.
Replacing the Charger
Replace the charger whenever the fol-
lowing message appears on the panel
display.
lowing message appears on the panel
display.
IPDL-C
Need Chargerr
R
WARNING:
R
CAUTION:
Note
❒ Before removing the charger from
the printer, spread paper or some
other material around the area you
are working to keep toner from
making floor dirty.
other material around the area you
are working to keep toner from
making floor dirty.
A
Turn off the printer’s power
switch.
switch.
B
Push the front cover release but-
ton and open the front cover.
ton and open the front cover.
C
Holding the green inset grips of
the photoconductor unit, pull the
top of the unit forward.
the photoconductor unit, pull the
top of the unit forward.
•
Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
or used toner. Toner dust
might ignite when exposed to
an open flame.
•
Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
authorized dealer or at appro-
priate collection sites.
•
If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
er containers yourself, dis-
pose of them according to
your local regulations.
•
When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E