Gestetner 1502 User Guide
Auto Reduction
11
1
Auto Reduction
By default, if the receiver's paper is
smaller than the paper you are send-
ing on, the message is automatically
reduced to fit onto the paper available
at the other end.
smaller than the paper you are send-
ing on, the message is automatically
reduced to fit onto the paper available
at the other end.
Important
❒ If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
❒ You can switch this feature on and
off with the User Parameters. The
default setting is on. See P.72 “User
Parameters” (Switch01, Bit2).
default setting is on. See P.72 “User
Parameters” (Switch01, Bit2).
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Facsimile mode and the standby
display is shown.
B
Set your original and select any
scan settings you require.
scan settings you require.
C
Press the
{{{{Transmission Option}}}} key.
The Transmission Option menu
appears.
appears.
D
Press
0
0
0
0 or 1
1
1
1 until "7. Auto Re-
duction" is displayed and press
the
the
{{{{OK}}}} key.
E
Press
0
0
0
0 or 1
1
1
1 to select "On" or
"Off".
F
Press the
{{{{OK}}}} key.
G
Press the
{{{{Transmission Option}}}} key.
H
Specify the destination.
If you want to specify another des-
tination, press the
If you want to specify another des-
tination, press the
{OK} key and re-
peat step
H.
I
Press the
{{{{Start}}}} key.
Transmitter
(This machine)
Receiver
Reduction
ND1X02E0
ND1X02E1