Gestetner 3245e Operating Guide

Setting Originals on the Exposure Glass (Platen Glass)

31

The exposure glass (platen glass) can be used when scanning originals that cannot
be set in the document feeder (ADF), such as books or originals that have been
pasted together. These types of originals will be referred to as “book originals”.
Follow the procedure below to set originals on the exposure glass (platen glass).

A

Lift the platen cover or the document feeder (ADF), and place the original
face down on the exposure glass (platen glass).
Align the original with the reference mark.

1. Reference mark

❒ Set the original after correction fluid and ink has completely dried. Not

taking this precaution could mark the exposure glass (platen glass) and
cause marks to be copied.

❒ Set the original in the direction shown in the illustration. The direction of

resulting scan is as follows.

1. Reference mark

B

1

TACY010E

1

TACY020E