Gestetner 3245e Operating Guide

Basic Operation

32

You can set several pages of originals in the document feeder (ADF) at a time.
Only originals that consist of separate sheets of paper can be set in the document
feeder (ADF); these originals will be called “sheet originals”. It is possible to
copy not only one side but both sides of originals that are set in the document
feeder (ADF).

❒ The document feeder (ADF) is optional. Preparation is required to use it.

❖

For more information about recommended and non-recommended originals
for the document feeder (ADF), see the “Copy Reference”.

❒ When using the scanner unit, you cannot set the following types of origi-

nals in addition to those you cannot use for the copy function in the docu-
ment feeder (ADF).
• Originals smaller than A5
• Originals longer than the long-edge of Double Letter

❒ Setting non-recommended originals in the document feeder (ADF) might

cause paper misfeeds or damage to the originals. Set these originals on the
exposure glass (platen glass).

❖

• Do not stack originals above the limit mark.
• When copying thin originals (41–52 g/m

2

 11–14 lb), set the originals on the

exposure glass (platen glass) to avoid damage due to a multi-sheet feed (if
several sheets are fed together at the same time).

• When irregular size originals that are longer than A4 or Letter are loaded,

a paper misfeed may occur in the document feeder (ADF).

• For more information about the automatically detected original size, see

the "Copy Reference".

❒ The automatically detected original size differs depending on Metric/

Inch version.