Gestetner cs331 Service Manual
1
2
3
4
5
6
7
8
9
10
11
12
9-21
If test stapling fails to be performed and the following
message remains displayed, repeat the above procedure
from steps 1 to 12.
message remains displayed, repeat the above procedure
from steps 1 to 12.
Set staple cartridge
11
Confirm that the finisher is attached to the copier,
and that the paper size is set to any size other
than ST-R.
- Test stapling cannot be performed when only ST-R paper is
available.
12
Close the front cover of the finisher. Test stapling
is then automatically performed on a blank sheet.
- This operation is carried out to avoid empty stapling.
Saddle Stitch Unit (SR940 only)
1
Open the lower cover of the finisher.
10
Reinstall the stapler unit in its previous position and
turn the blue lever 90
o
to the right to latch the stapler
unit.