Gestetner dsc332 Operating Guide
PostScript 3
14
1
Sample Print
Follow the procedure below to print a document using the Sample Print func-
tion.
tion.
Windows 95/98/Me
Note
❒ If the application has a collate option, make sure it is not selected before send-
ing a print job. By default, sample print jobs are automatically collated by the
printer driver. If the collate option is selected in the application's [Print] dialog
box, more prints than intended may be printed.
printer driver. If the collate option is selected in the application's [Print] dialog
box, more prints than intended may be printed.
AAAA
From an application, click [Print] on the [File] menu.
The [Print] dialog box appears.
The [Print] dialog box appears.
BBBB
Select the printer, and then click [Properties].
CCCC
Click the [Setup] tab.
DDDD
In the [Job Type:] list, click [Sample Print].
EEEE
Click [Details...].
FFFF
In the [User ID] box, enter the user ID using up to eight alphanumeric (a-z,
A-Z, 0-9) characters.
A-Z, 0-9) characters.
Note
❒ This is used to identify the user associated with a job.
GGGG
Click [OK].
HHHH
Click [OK] to close the printer properties dialog box.
IIII
Set the number of copies to two or more, and then start the printing from
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
JJJJ
Check the printed output to make sure the settings are correct.
If the settings are correct, proceed to step
If the settings are correct, proceed to step
to print the remaining sets.
If you want to delete a saved job, see p.20 “Deleting a Sample Print File”.
KKKK
On the machine's control panel, press the
{{{{Printer}}}} key to display the printer
screen.