Gestetner dsc332 Operating Guide
1
Clearing Z2 Misfeeds
R CAUTION:
When “Z2” Is Indicated (1)
When a paper misfeed occurs in the
area indicated by Z2, the machine au-
tomatically delivers the misfed paper
to the lower right cover. Follow the
procedure below to clear the paper
misfeed.
area indicated by Z2, the machine au-
tomatically delivers the misfed paper
to the lower right cover. Follow the
procedure below to clear the paper
misfeed.
AAAA
Open the lower right cover.
BBBB
Move the blue lever (A) up and
down to remove the misfed pa-
per.
down to remove the misfed pa-
per.
CCCC
Press the part labelled “PUSH” to
close the lower right cover.
close the lower right cover.
DDDD
If “Z2” is still indicated, open the
duplex reversal unit.
duplex reversal unit.
Note
❒ If the finisher is installed, first
detach it from the machine.
EEEE
Check if there is any paper in the
opening to the duplex reversal
unit.
opening to the duplex reversal
unit.
FFFF
Close the duplex reversal unit.
Note
❒ If the finisher is installed, reat-
tach it to the machine.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating a
"hot surface". Touching a "hot
surface" could result in a burn.
parts with a label indicating a
"hot surface". Touching a "hot
surface" could result in a burn.
ACK002S
ZDJY205J
ACK003S
ACK001S
JupC1_GB_Z2misfeed-F_FM.book Page 1 Monday, December 15, 2003 3:49 PM