Gestetner dsc332 Operating Guide
User Tools (System Settings)
50
4
❖
❖
❖
❖ Print Priority
Print Priority is given to the mode selected.
Reference
p.27 “Multi-Access”
Note
❒ Default: Display mode
❒ When [Interleave] is selected, the current print job will be interrupted after
❒ When [Interleave] is selected, the current print job will be interrupted after
a maximum of five sheets.
❒ When the left tray, 2 tray finisher, or booklet finisher is installed on the ma-
chine, you can specify an output tray for each document to be delivered.
For details about how to specify an output tray for each function, see the
following sections:
• p.51 “Output: Copier (copier)”
• p.51 “Output: Document Server (Document Server)”
• p.51 “Output: Facsimile (facsimile)”
• p.52 “Output: Printer (printer)”
For details about how to specify an output tray for each function, see the
following sections:
• p.51 “Output: Copier (copier)”
• p.51 “Output: Document Server (Document Server)”
• p.51 “Output: Facsimile (facsimile)”
• p.52 “Output: Printer (printer)”
❖
❖
❖
❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function (see p.27 “Multi-Access”). This is useful
if you are making many copies and have to change settings for each copy. If
you set a longer reset period, you can prevent interruption from other func-
tions.
when using the multi-access function (see p.27 “Multi-Access”). This is useful
if you are making many copies and have to change settings for each copy. If
you set a longer reset period, you can prevent interruption from other func-
tions.
Note
❒ Default: 3 seconds
❒ The Function Reset Timer setting is ignored if [Interleave] is set for Print Pri-
❒ The Function Reset Timer setting is ignored if [Interleave] is set for Print Pri-
ority (see p.50 “Print Priority”).
❒ When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
0816JupiterC1GSG_GB_FM.book Page 50 Friday, August 29, 2003 7:56 PM