Gestetner dsc332 Operating Guide
Facsimile Features
142
8
-
-
-
-Key Operator Code
When Key Operator Code is programmed and turned on, users have to enter a
programmed Key Operator Code (eight digits maximum) to operate the User
Tools. This prevents unauthorized people from changing settings.
programmed Key Operator Code (eight digits maximum) to operate the User
Tools. This prevents unauthorized people from changing settings.
Note
❒ You can turn the Key Operator Code on or off in “User Tools Menu (System
Settings)”. See “Key Operator Tools”, General Settings Guide.
❒ When you set the Key Operator Code to active, enter a code (eight digits max-
imum) using the number keys and select [Partial] or [All Initial Settings] to limit
access.
• When [Partial] is selected:
access.
• When [Partial] is selected:
Only Key Operator Tools are protected with a Key Operator Code.
• When [All Initial Settings] is selected:
Key Operator Tools and User Tools are protected with a Key Operator
Code.
Code.
A
Press the
{{{{User Tools/Counter}}}} key.
B
Press [Facsimile Features].
If you have selected [All Initial Settings], proceed to step
If you have selected [All Initial Settings], proceed to step
D.
C
Press [Key Operator Tools].
D
Enter a Key Operator Code (eight digits maximum) using the number keys.
E
Press [OK].
Note
❒ If you enter a Key Operator Code not programmed, the display will return
to that of step
D.
JptrC1FaxGBCombine_F_FM.book Page 142 Thursday, August 21, 2003 11:33 AM