Gestetner dsc332 Operating Guide
Configuring TCP/IP
51
4
Configuring a Windows NT 4.0
Computer
Computer
Follow the procedure below to con-
figure a Windows NT 4.0 computer to
use TCP/IP.
figure a Windows NT 4.0 computer to
use TCP/IP.
AAAA
Open [Control Panel], and then
double-click the Network icon.
Make sure [TCP/IP Protocol] is list-
ed in the [Network protocols] box on
the [Protocols] tab.
double-click the Network icon.
Make sure [TCP/IP Protocol] is list-
ed in the [Network protocols] box on
the [Protocols] tab.
Note
❒ If TCP/IP is not installed, click
[Add]
on the [Protocols] tab to in-
stall it. For more information
about installing TCP/IP, see
Windows NT 4.0 Help.
about installing TCP/IP, see
Windows NT 4.0 Help.
BBBB
Configure TCP/IP using the ap-
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.