Manualsbrain.com
  1. Manuals
  2. Brands
  3. Gestetner
  4. dsc535
  5. Operating Guide

Gestetner dsc535 Operating Guide

Download
Page of 317
Connecting the Machine
24
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port]
.
Reference
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with ethernet cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Menu
User Tool
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Neccessary
Interface Settings/Network IPv4 Gateway Address
Neccessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Neccessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network LAN Type
Neccessary
Interface Settings/Network Permit SNMPv3 Communication
As required
Interface Settings/Network Permit SSL/TLS Communication
As required
Interface Settings/Network Host Name
As required
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required