Gestetner dsc535 Operating Guide
Network Settings
25
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
terface takes precedence.
Reference
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
Menu
User Tool
Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address
Neccessary
Interface Settings/IEEE 1394 DDNS Configuration
As required
Interface Settings/IEEE 1394 Host Name
As required
Interface Settings/IEEE 1394 Domain Name
As required
Interface Settings/IEEE 1394 WINS Configuration
As required
Interface Settings/IEEE 1394 IPv4 over 1394
Neccessary
Interface Settings/Network IPv4 Gateway Address
Neccessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network Effective Protocol
Neccessary
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required