Gestetner f250 Operating Guide

P

APER

 H

ANDLING

2.4

- To avoid smudging caused by fingerprints, handle them and 

coated paper carefully.

- To avoid fading, do not expose the printed transparencies to 

prolonged sunlight.

• For labels(for MFP model only):

- Verify that their adhesive material can tolerate fusing 

temperature of 200 

o

C (392

o 

F) for 0.1 second.

- Make sure that there is no exposed adhesive material 

between them. Exposed areas can cause labels to peel off 
during printing, which can cause paper jams. Exposed 
adhesive can also cause damage to machine components.

- Do not load a sheet of them through the machine more than 

once. The adhesive backing is designed for one pass 
through the machine.

- Do not use labels that are separating from the backing 

sheet or are wrinkled, bubbled, or otherwise damaged.

• Do not use Carbonless paper and Tracing paper. They could 

make smell of chemicals and damage your machine. 

The machine has two output locations; the rear output slot (face 
up) and the front output tray (face down). 

To use the front output tray, make sure that the rear cover is 
closed. To use the rear output slot, open the rear cover.

: 

• If paper coming out of the front output tray has problems, such 

as excessive curl, try printing to the rear output slot.

• To avoid paper jams, do not open or close the rear cover while 

the machine is printing.