Gestetner f9103 Operating Guide
Other Transmission Features
28
3
Scanner Cleaning Message
If dirt is stuck to the scanner, the other
party receives fax messages with
black lines. When the scanner is dirty,
the warning message "Scanner Needs
Cleaning" is displayed. If this mes-
sage is displayed, wipe the exposure
glass and white strip to remove the
dirt, and then press the
party receives fax messages with
black lines. When the scanner is dirty,
the warning message "Scanner Needs
Cleaning" is displayed. If this mes-
sage is displayed, wipe the exposure
glass and white strip to remove the
dirt, and then press the
{{{{OK}}}} key. You
can choose whether this message is
displayed with User Parameters. See
p.85 “User Parameters” (switch 20, bit
7). For cleaning the scanner, see p.112
“Cleaning the Scanner”.
displayed with User Parameters. See
p.85 “User Parameters” (switch 20, bit
7). For cleaning the scanner, see p.112
“Cleaning the Scanner”.
Note
❒ If the dirty part of the scanner is
small, the machine corrects the
black line made when scanning
originals. The black line does not
appear on the received message.
However, sometimes very small
parts of the image might be miss-
ing on the received message. You
can turn this function on or off
with User Parameters. See p.85
“User Parameters”(switch 20, bit
4).
black line made when scanning
originals. The black line does not
appear on the received message.
However, sometimes very small
parts of the image might be miss-
ing on the received message. You
can turn this function on or off
with User Parameters. See p.85
“User Parameters”(switch 20, bit
4).
StellaF1EN-3_FM.book Page 28 Monday, November 12, 2001 11:40 AM