Lexmark X644e Reference Guide
Attendance messages
109
Understanding MFP messages
290.02 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner fails to feed a sheet far
enough into the ADF so that the ADF
recognizes its presence.
enough into the ADF so that the ADF
recognizes its presence.
The message clears when the scanner knows
that the sheet is removed from the ADF.
that the sheet is removed from the ADF.
290.10 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects an original
document jam at the first scanning
sensor while the scanner is idle.
document jam at the first scanning
sensor while the scanner is idle.
Clear the jam from the scanner to clear the
message.
message.
291.00 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects an original
document jam at the second scanning
sensor while the scanner is idle.
document jam at the second scanning
sensor while the scanner is idle.
Clear the jam from the scanner to clear the
message.
message.
291.01 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects an original
document jam at the first scanning
sensor.
document jam at the first scanning
sensor.
Clear the jam from the scanner to clear the
message.
message.
291.02 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects an original
document jam at the second scanning
sensor.
document jam at the second scanning
sensor.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
292 Scanner jam, remove
all originals from the
scanner
all originals from the
scanner
The ADF cover is open while the ADF
is feeding the original document.
is feeding the original document.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
293 Replace all
originals if restarting
job.
originals if restarting
job.
The MFP is sent a scan job; however,
there is no original document in the
ADF.
there is no original document in the
ADF.
Touch Continue if no scan job is active when
the attendance message appears. This clears
the message.
the attendance message appears. This clears
the message.
Touch Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
when the attendance message appears. This
cancels the job and clears the message.
Touch Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
294.00 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
exit sensor while the scanner is idle.
exit sensor while the scanner is idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
294.01 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
exit sensor.
exit sensor.
Remove all original documents from the ADF.
The message clears.
The message clears.
294.02 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam prior to
reaching the ADF exit sensor.
reaching the ADF exit sensor.
Remove all original documents from the ADF.
The message clears.
The message clears.
294.03 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
exit sensor.
exit sensor.
Remove all original documents from the ADF.
The message clears.
The message clears.
Message
Meaning
Action