ICOM ic-207h Instruction Manual

REPEATER OPERATION

Push [BAND] to select the desired band, if nec-
essary.

Set the receive frequency (repeater output fre-
quency). (pgs. 15–19)

Push [

➆DUP–] to select – duplex; push

[

➇DUP+] for + duplex.

Push [FUNC] then [

➆TONE] to turn ON the

subaudible tone encoder according to repeater
requirements.

• Refer to p. 26 for tone frequency setting.

• When the repeater requires a different tone system,

see at right.

Push and hold [PTT] to transmit.

Push and hold [

➀MONI] to check whether the

other station’s signal can be directly received.

Release [PTT] to receive.

To return to simplex operation, push [

➈SIMP].

To turn OFF the subaudible tone encoder, push
[FUNC], then [GT-OFF].

D DTMF tones

Push [DTMF-S], then push the keys of the desired
DTMF digits.

• The function indicator lights green.
• 0–9, A–D, M(E) and #(F) are available.
• Cancel the DTMF memory encoder function in ad-

vance. (p. 48)

• Push [DTMF-S] again to return the keypad to normal

function control.

• The transceiver has 14 DTMF memory channels for

autopatch operation. See p. 46 for details.

D 1750 Hz tone

A 1750 Hz tone is required to access most European re-
peaters. The microphone has 1750 Hz tone capability.

Push [FUNC].

• The mode indicator lights orange.

Push [

TONE-1] to transmit a 1750 Hz tone

call signal for 0.5 sec.; push and hold [

TONE-

2] to transmit a 1750 Hz tone call signal for an
arbitrary period.

• The mode indicator goes out automatically.
• The optional HM-90 also has 1750 Hz tone capability.

TONE-1

TONE-2

DUP–

DUP+

SIMP

DTMF S