ICOM ic-207h Instruction Manual
5
REPEATER OPERATION
26
■ Subaudible tones
➀
Push [BAND] to select the desired band.
➁
Select the mode/channel you wish to set the subaudible
tone frequency to, such as VFO mode or memory/call
channel.
tone frequency to, such as VFO mode or memory/call
channel.
➂
Push [SET] one or more times until “T” and “rT” appears
for repeater use; or until “T SQL” and “CT” appears for tone
squelch or pocket beep use.
for repeater use; or until “T SQL” and “CT” appears for tone
squelch or pocket beep use.
• Push [MONI] to reverse the order of selection.
• Cancel the DTMF memory encoder function in advance. (p. 48)
• Cancel the DTMF memory encoder function in advance. (p. 48)
➃
Rotate the tuning dial to select and set the desired fre-
quency.
quency.
➄
Push [V/MHz] to exit set mode.
NOTE: The subaudible tone frequency can be set in a
memory channel temporarily. However, the set contents
are cleared once the memory/call mode is selected. To
store the tone frequency permanently, overwrite the chan-
nel information.
memory channel temporarily. However, the set contents
are cleared once the memory/call mode is selected. To
store the tone frequency permanently, overwrite the chan-
nel information.
USING
SET MODE
Separate setting for each band
The display shows that an
88.5 Hz subaudible tone
frequency is set for re-
peater use.
88.5 Hz subaudible tone
frequency is set for re-
peater use.
T
H I
1
9
5
Ä
Push [BAND] to select the desired band, if nec-
essary.
essary.
Å
Set the mode/channel you wish to set the sub-
audible tone frequency to, such as VFO mode,
memory/call channel or scratch pad memory.
audible tone frequency to, such as VFO mode,
memory/call channel or scratch pad memory.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
Ç
Push [FSET] one or more times until “T” and
“rT” appears for repeater use; or until “T SQL”
and “CT” appears for tone squelch or pocket
beep use.
“rT” appears for repeater use; or until “T SQL”
and “CT” appears for tone squelch or pocket
beep use.
• Pushing [GENT] reverses the order of selection.
• Cancel the DTMF memory encoder function in ad-
• Cancel the DTMF memory encoder function in ad-
vance. (p. 48)
É
Push [Y] or [Z] to select and set the desired
frequency.
frequency.
• Pushing and holding [Y] or [Z] changes the fre-
quency continuously.
Ñ
Push [ECLR] to exit set mode.
• Subaudible tone frequency list
(unit: Hz)
67.0
79.7
94.8
110.9
131.8
156.7
171.3
186.2
69.3
82.5
97.4
114.8
136.5
159.8
173.8
189.9
71.9
85.4
100.0
118.8
141.3
162.2
177.3
192.8
74.4
88.5
103.5
123.0
146.2
165.5
179.9
196.6
77.0
91.5
107.2
127.3
151.4
167.9
183.5
199.5
203.5
206.5
210.7
218.1
225.7
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
233.6
241.8
250.3
254.1
SET
B