Maxent mx-20v2 User Manual

17

Mini-stereo to

 

Connect the green-colored (labeled as Y) jack
from the STB  to the green-colored jack of the
monitor.

Connect the blue-colored (labed as P

B

 or C

B

)

jack from the STB to the red-colored jack of the
monitor.

Connect the red-colored (labed as Pb or Cb)
jack from the STB to the red-colored jack of the
monitor.

Connect the red (R) and white (L) audio jacks
from the STB to the R and L audio-in jacks
located up on the component connector.

Connect the 15-pin D-Sub RGB connector from
the back of the HDTV set top box to the RGB-IN
Connector located on the back of the monitor.

Connect the red (R) and white (L) audio-out
jacks from the HDTV set top box to the 3.5 mm
ear-phone audio-in jacks located next to the
RGB IN connector.

Notes:
„

Some HDTV Set top boxes may not have a RGB output.  Use Component Video input or DVI input
method if this is the case.

„

Upon connecting your HDTV set top box to the RGB input of the monitor, it may be necessary to
adjust various picture settings on the monitor to correctly match the output of the HDTV set top box.
This is caused by the different video timings set by various HDTV set top box manufacturers.  (See
Page 42 for more information).

„

RGB input may not be available on your display as this is an optional accessory.  Please contact
your local sales representative for purchase information.

There are one set of component video input provided. You can use this component input to connect your STB.