Olympus 1040 User Guide

34 EN

S SETUP X REC VIEW

OFF

The image being recorded is not 
displayed. This allows the user 
to prepare for the next shot while 
following the subject in the monitor 
after shooting.

ON

The image being recorded is 
displayed. This allows the user to 
make a brief check of the image 
that was just taken.

  Even when set to [ON], you can resume 

shooting while the image is being displayed.

S SETUP X FILE NAME

RESET

This resets the sequential number 
for the folder name and fi le name 
whenever a new card is inserted.

*1

 

This is useful when grouping 
images on separate cards.

AUTO

Even when a new card is inserted, 
this continues the numbering for 
the folder name and fi le name from 
the previous card. This is useful for 
managing all image folder names 
and fi les names with sequential 
numbers.

*1

  The number for the folder name is reset to 100, and 

the one for the fi le name is reset to 0001.

S SETUP X PIXEL MAPPING

  This function has already been adjusted 

at factory shipping, and no adjustment is 
needed right after purchase. Approximately 
once a year is recommended.

  For best results, wait at least one minute 

after taking or viewing pictures before 
performing pixel mapping. If the camera is 
turned off during pixel mapping, be sure to 
perform it again.

To adjust the CCD and to adjust the 
image processing function
Press the x button when [START] 
(submenu 2) is displayed.

The camera checks and adjusts the CCD and the 
image processing function at the same time.

Month: 1 to C
(A=October, 
B=November, 
C=December)

Day: 01 to 31

Pmdd

Folder name

Folder name

File name

DCIM

100OLYMP

999OLYMP

Pmdd0001.jpg

Pmdd9999.jpg

Automatic 
numbering

Automatic 
numbering

d4377_e_oima_000_book_cs2e.indb   34

d4377_e_oima_000_book_cs2e.indb   34

7/1/2008   12:09:05 PM

7/1/2008   12:09:05 PM